PSC Scanners Spezifikationen PDF herunterladen (Seite 39)

Product Reference Guide 2-11

Counter Cutout

The most important consideration when planning the counter opening

for the scanner is the operator’s comfortable reaching distance. The ideal,

ergonomically sound installation allows items to be directed within easy

reach, and a scanning area requiring no lifting or special orientation of

items. If you haven’t already read the information at the beginning of this

section titled, Pre-Installation Considerations, please do so before continu-

ing these instructions.

The symmetrical design of the scanner permits the operator to easily pass

items from one hand to the other while scanning (either from right-to-left

or left-to-right). With the unique 360- scan zone, scanning is accom-

plished in one fluid motion. The operator simply slides the item from the

conveyor belt or diverter area through the scanning area and passes the

item to the other hand, which in turn bags it or places it on a take-away

conveyor belt. Movement should flow naturally over the surface of the

scanner.

Note that the following guidelines for preparing an existing checkstand to

accept a scanner, or incorporating the unit into a new checkstand design

will not be accurate for all installations. Although these guidelines will suf-

fice for most standard installations, the installer may need to make adjust-

ments for varying counter heights and thicknesses, support design, or

other checkstand limitations.

Figure 2-6 shows a typical “left-hand-take-away” checkstand design.

Follow these basic steps to install the unit:

1. Select a position for the scanner that offers a smooth product flow

which best accommodates the reaching distance of the average

operator.

2. Cut the opening in the countertop. Select the appropriate draw-

ing from Figure 2-7, Figure 2-8, or Figure 2-9 for your model.

3. Install the AC/DC Power Supply, the Remote Scale Display cable

and the interface cable(s) observing the following:

Interface cables (and display cable, if applicable) should be

routed away from all highly inductive electrical devices, like

motors and conveyor belts, and even away from the unit’s

power cable if possible.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 439 440

Keine Kommentare

PSC Scanners Spezifikationen Seite 39