PSC Scanners Spezifikationen PDF herunterladen (Seite 61)

100

101

Product Reference Guide 2-33

System Power-Up Recap

The System Power-Up procedure may vary depending upon the require-

ments of your POS system. It is generally a good practice to power-down

(switch off) all equipment prior to connecting cables. Check with your

System Supervisor and/or refer to your POS terminal manual for proper

power-down and power-up procedures and interface requirements when

connecting any peripheral device.

If you have not identified any specific requirements for your POS system,

follow these steps.

1. Power-down the POS terminal.

2. Ensure that power is disconnected from the scanner.

3. Connect the scanner and scale interface cables to your POS ter-

minal. This connection may use one or two cables depending

upon your POS terminal interface.

4. Connect the Remote Display cable if your model is a scanning-

scale and make any connections to optional equipment, such as

EAS or a handheld scanner.

5. Power-up the scanner or scanning-scale by connecting the power

cord to an AC power outlet. Wait for the unit to complete the

Selftest routine (10 seconds maximum).

6. Power-up the POS terminal.

7. Verify that both scanning and weighing data are properly com-

municated between the scanner and your POS system. (Weigh

and scan a few items.) If problems are encountered, refer to

Section 4, Problem Isolation.

8. You have now completed installation and system integration of

the scanner or scanning-scale. At this point, the scale must be cal-

ibrated and certified in accordance with the requirements of your

state and/or local requirements. Refer to Section 5, Calibration,

for calibration procedures.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 439 440

Kommentare zu diesen Handbüchern

Keine Kommentare

PSC Scanners Spezifikationen Seite 61

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Barcodeleser PSC Scanners